Видео

Cheers BigLife much appreciated 🤜🏻🤛🏻

Ahhh I’m made up with that and glad you enjoyed it 🤜🏻🤛🏻👌🏻

Cheers for the feedback much appreciated 🤜🏻🤛🏻

Thank you I’m so pleased you enjoyed it, happy welding 🤜🏻🤛🏻👌🏻

Fit like as we say up in the north east of Scotland my man! Thanks for the kind words and the awesome message and good luck with the build. The same reason I built mine was for small thin metal parts and finding them so hard to hold this is an absolute brilliant thing to have in the table. I’m having a wee break from making as I’m travelling just now but hope to do more in the future, also do a fair bit on Instagram. Take care my friend and thanks again for watching and sending a message, very much appreciated 🤜🏻🤛🏻👍🏻🙌🏻

Thanks Kelly really appreciate the comments and good luck with your project 🤜🏻🤛🏻👍🏻

Such a handy metal shape and now with aluminium extrusion being so diverse there are so many more options! Thanks for watching 👍🏻👍🏻

Welcome 🙏🏻

Thanks for watching appreciate the comments 👍🏻

Thanks Donny that’s a very nice thing to say buddy. It bent my brain this one for sure! Cheers 🍻

😂😂😂 I did go for the creepy feel on this one so glad that came across. Thanks for watching and commenting 🙏🏻🤜🏻🤛🏻

Cheers my man, thanks for the comments and support 👍🏻👍🏻

Thanks, and much appreciated 🙏🏻👍🏻

Fantastic I’m so pleased you found it useful and good luck with your project! 🙏🏻🤜🏻🤛🏻

No apologies need and value the feedback Mandy, the video is quite old and have taken on board the feedback in newer vids on music and volume. Thanks for watching and saying hi 🙏🏻

Cheers Dan much appreciated my friend 🤜🏻🤛🏻

Hi Vicky I made all the brackets and holders myself from various bits of metal as I also couldn’t find the right thing.

Sorry akrenitz I don’t have those details to hand, basically you could make it any size and just adjust the heat and dehumidifier drying g times. 👍🏻

Greetings for Scotland, the world is a small place when it comes to social media 🙏🏻👍🏻

Sounds like a great plan and you could bond some sheet steel to the MDF and just turn it over to have wood and metal top in one? Thanks for watching and taking the time to comment 👍🏻

Thanks dude really appreciate it 🤜🏻🤛🏻

Thanks Darren, hope you manage to make something soon bud 🤙🏻🙏🏻

Me to. Ps your pod cast with teapot one( aka Bruce) was great to watch.

Cheers Darren very much appreciated 🙏🏻

Cheers Joe thanks for the kind words, very much appreciated 🙏🏻

Thanks for the comments and that’s the beauty of RUclips, the vid will be here forever! Nice to be in a position to choose what equipment you start from, believe me you skipped the pain process and may never know the hardship 😂😂 but there is nothing more compelling in welding than just burning plate! Seat time is king, and I’m so rusty in my welding process again as I’ve not been hands on it’s like starting fro the beginning! 😂 Good luck on your learning journey and I’m so glad to have helped in a small way! Thank you 🙏🏻

@@ManCaveMakings you sir are a real gentleman!

Thank you, really appreciate that, thanks for watching and taking the time to comment and interact. 🤜🏻🤛🏻🙏🏻

Appreciate the support Billy 💪🏻🤜🏻🤛🏻

Thank you Richard that is so nice of you to reach out after listening to the podcast! Had a blast speaking to Bruce and I do most of my work on Instagram if you have it? Thanks for the sub and look forward to having you on the journey with me. Thanks man 🤘🏻🤜🏻🤛🏻🙏🏻

Digital, if you are referring to the TIG machine set up? 👍🏻

@@ManCaveMakings yep ac dc tig im ordering this week. But just cant decide. Thanks for prompt reply

Ahh that’s a different question, I always wished I had gone bigger and also AC! I just didn’t have the money at the time, regret it now as I can’t do any aluminium as it’s DC only I have. If I had a do over I would find the money and invest! Hope that helps 🤙🏻

@@ManCaveMakings i know i want a ac-dc but cant decide on digital or analogue what would you do ? (The extra 200 is immaterial as i will have this for many years) also they do interest free credit at r tech?

Depends on what you do and also what your skill level is, basically if it was me and I had the extra £200 I would be going with the digital as the presets alone would save time and faffing about with dials etc.

Loving the name qwerty and thanks for the watch and comments, good luck with the build 👍🏻👍🏻

Thanks for the comment and totally agree it was difficult to make a consistent stitch but after a little practice and starting it with a bit of scrap the machine seemed to cope with it fairly well. Tricky thing to get right for sure! Thank you 🙏🏻

Thank you Derick I really appreciate the comment my friend. 🙏🏻🤜🏻🤛🏻

Thanks LJ, you will not regret it, I use mine nearly every time I fabricate something and would not be without it on my bench! Good luck my friend 🤙🏻

Thank you 🙏🏻

Hi Amanda, I didn’t measure it unfortunately and we don’t have the van anymore for me to check. The bed space was quite tight though as the garage compartment can take a full sized motorcycle.

Cheers Nick thanks for watching 🤜🏻🤛🏻

Welcome friend 🙏🏻

Thanks Ric, hope you get to make it man 👍🏻👍🏻

Great tip Allan thanks 🙏🏻 I often use a storing stick or lollipop stick but will give the dowel a go also. Thanks

Thanks For taking time to watch my content and glad you found it helpful really appreciate the comments. 🤜🏻🤛🏻🙏🏻

I see you bought the R-tech welder. It does appear a bit expensive but a good named brand comes with qaulity. Im looking at buying my first Tig welder but trying to fine one at the right price. looking for AC/DC, Pulse and HF start. for thin metals can you recomend anything?

Hi Brendan, I don’t have a huge amount of experience with different machines unfortunately as the ones I used commercially are all high end machines such as Miller, Lincoln, Kemppi and I will admit that I should have saved a little more to get the AC/DC Rtech unit as I only have DC tig. It will also vary depending where you are in the world and availability but I have heard of the Parweld units getting good reviews but again I think they are comparable to the Rtech equivalent. Good luck in your search. 🤜🏻🤛🏻

@@ManCaveMakings Thanks for the help. I have just bought the R-Tech welder also. cheaper options seem to come with issues and no foot peddle. Have you tried using different gloves.. for the weekend warrior does it make a big difference? I only have some stick welding gloves or mechanix gloves at the moment.

Great news Brendan I think they are a great machine for the money and I would buy one again for sure. Yes yes yes!!! TIG gloves makes a huge difference especially if you’re dealing with thinner rods like 1.6mm etc. I use Click 2000 Drivers Work Premium Leather Gloves Adjustable Cuff (search this under eBay) but essentially it’s a driving glove and they are great, reasonable in price and not branded so means you don’t pay a premium for the name!!

Thanks for your feedback Dave, this is definitely something I’m aware of now and as I have learnt the editing process I am conscious of the levels of music vs speech vs background noise and in my more recent videos I have worked hard on these. Thanks for the feedback it’s much appreciated 🤜🏻🤛🏻🙏🏻

Thank so much! 🤜🏻🤛🏻🙏🏻